The 034Motorsport X34 SüperDüper Insuction Bundle is Now Available for B9/B9.5 Audi SQ5 3.0T

source: 034Motorsport

The 034Motorsport SüperDüper Turbo Inlet Pipe paired with the X34 Carbon Fiber Intake System is an essential upgrade to optimize power by eliminating a critical flow restriction in the intake tract when running the Factory Turbocharger or Stage 3 Hybrid Turbochargers with accompanying tuning for the most performance possible! Included with the SüperDüper Insuction Bundle is an even larger CFD-optimized carbon fiber tube to properly mate the X34 Carbon Fiber Intake System and SüperDüper Turbo Inlet Pipe. The 034Motorsport SüperDüper Turbo Inlet Pipe is designed to maximize performance for Stage 3 Hybrid Turbo Tuning Software. The CNC machined edge retains the silicone hose securely to the turbo inlet pipe. The final touch is an embossed 034 logo to show unsuspecting car show attendees that you value substantive modifications on your 3.0T powered Audi.

Intake Features:

  • Developed In-House by 034Motorsport’s Engineering Team
  • Fits Both Left and Right Hand Drive Configurations
  • High-Quality Carbon Fiber Air Duct, Airbox, and Intake Tube
  • Strong and Lightweight Carbon Fiber Construction
  • Increased Scoop Size Over Stock for More Airflow
  • High-Gloss Epoxy Finish
  • OEM+ Fit and Finish
  • Dyno-Proven Horsepower and Torque Gains
  • Improved Airflow from Factory Airbox and Intake Tube
  • Enhanced Engine Induction Sounds
  • Improved Throttle Response
  • Massive 5″ Inlet, 1003 CFM, Conical Pleated Cotton Air Filter
  • Filter is unshrouded, Unlike Other Intakes, to Provide Maximum Air Flow
  • Large-Diameter CFD-Optimized Carbon Fiber Filter Tube
  • Reduced Intake Air Temperature
  • Securely Installs Using Factory Mounts
  • Simple, Straightforward Installation Instructions
  • No Modifications Required
  • Completely Reversible Installation

SüperDüper Turbo Inlet Features:

  • Cast from A356 Aluminum
  • Compressor Inlet Flange Adapter Machined for Smooth Airflow Into Compressor Housing
  • CNC Machined 6061-T6 Aluminum Turbo Inlet Adapter to Match Turbo Inlet for Maximum Airflow
  • Optional Adapter Rings Available
  • Increased Flow Over Factory Turbo Inlet
  • CNC Machined
    • Edge Retains Intake Coupler Securely
    • Retain OE PCV Hose
    • To Retain Factory Wiring Harness Retention Clips
  • Proven Power/Torque, and Airflow Gains
  • Slotted Lower Turbo Inlet Bolt for Easy Installation
  • Direct Bolt-on Installation.


CFM stands for “cubic feet per minute” of airflow, the higher the number, the higher the horsepower an intake can support, at 034Motorsport we design our intakes to have substantial flow increases over the factory intake, we test all our intakes at 28″ of water (how much vacuum is used to suck air through the intake) on a Superflow airflow bench which gives us very accurate and repeatable test results.

  • Stock Intake: 394 CFM @ 28” H²O
  • X34 Intake with 034 Standard Inlet, OE Adapter Ring: 453 CFM @ 28” H²O
  • X34 Intake with 034 Standard Inlet, 63mm Adapter Ring: 499 CFM @ 28” H²O
  • X34 Intake with SuperDuper Turbo Inlet, 66mm Adapter Ring: 570 CFM @ 28” H²O


  • 2018 – Present Audi SQ5 3.0T (B9/B9.5)


  • This product is sold for racing use as well as use on vehicles not registered for on highway use.
  • By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.